|
BGH-125-BF |
ULTIMATIC W/GRIP 1.5"BSP FEMALE
|
|
BH-125 |
ULTIMATIC NOZZLE 1.5" NH (38mm) Full automatic 100 psi (7 bar) nozzle with 1.5" NH (38mm) coupling and thread. Flow range of 10-125 gpm (40-500 l/min). Includes flush without shutting down, six position detent flow control slide valve, "Gasket Grabber" inlet screen, and molded rubber bumper with "power fog" teeth. Lightweight hard coat anodized aluminum for maximum resistance to corrosion and wear. Rocker lug 1.5" NH (38mm) full-time swivel coupling is standard.
|
|
B-BGH-BD |
ULTIMATIC W/GRIP 1.0"BSP FEMALE
|
|
BL-BGH |
ULTIMATIC W/GRIP - LOW PRESSURE VERSION Same as B-BGH above, but operates at a lower pressure of approximately 75 psi (5 bar). Flow range is 10-100 gpm (40-400 l/min).
|
|
BP20-058TA |
ULTIMATIC FO7 W/TRIG 1.5"BSP ARTICULATED
|
|
BP20-128 |
ULTIMATIC FO10 W/GRIP 1.0"BSP INLET
|
|
BTOL-125 |
ULTIMATIC TIP - LOW PRESSURE VERSION Same as BTO-125, but operates at a lower pressure of approximately 75 psi (5 bar). Flow range is 10-100 gpm (40-400 l/min).
|
|
BL-BGH-BD |
ULTIMATIC W/GRIP 1.0"BSP
|
|
BGH-2.5BIC |
ULTIMATIC W/GRIP 2.5"BIC MALE COUPLING
|
|
B-TO |
ULTIMATIC TIP 1.0" NH (25mm) Full automatic 100 psi (7 bar) nozzle with a flow range of 10-125 gpm (40-500 l/min). Tip does not shut off and must be used with a separate valve or valved playpipe. 1.0" (25mm) rigid knurled coupling is standard
|
|
BL-TO |
ULTIMATIC TIP - LOW PRESSURE VERSION. Same as B-TO, but operates at a lower pressure of approximately 75 psi (5 bar). Flow range is 10-100 gpm (40-400 l/min).
|
|
BTO-125 |
ULTIMATIC TIP 1.5" NH (38mm) Full automatic 100 psi (7 bar) nozzle with a flow range of 10-125 gpm (40-500 l/min). Tip does not shut off and must be used with a separate valve or valved playpipe. 1.5" NH (38mm) rigid rocker lug-coupling is standard.
|
|
BL-BGH-FO |
ULTIMATIC FO5 W/ RED GRIP 1.0"NH INLET
|
|
BP-DUAL |
DUAL AGENT W/GRIP WATER/DRY CHEM 1.0"BSP
|
|
BGH-125-38MM |
ULTIMATIC W/GRIP 38MM STORZ
|
|
|
B-BH |
ULTIMATIC NOZZLE 1" NH (25mm) Full automatic 100 psi (7 bar) nozzle for use on 3/4" (19mm) or 1" (25mm) hose. Flow range of 10-125 gpm (40-500 l/min). Includes flush without shutting down, six position detent flow control slide valve, "Gasket Grabber" inlet screen, and molded rubber bumper with "power fog" teeth. Lightweight hard coat anodized aluminum for maximum resistance to corrosion and wear. 1.0" NH (25mm) full-time swivel is standard.
|
|
BP20-063 |
ULTIMATIC FO7 W/GRIP 2.5"BIC MALE
|
|
BGHL-125 |
ULTIMATIC W/GRIP - LOW PRESSURE VERSION WITH 1.5" (38mm) COUPLING. Same as BGH-125 above, but operates at a lower pressure of approximately 75 psi (5 bar). Flow range is 10-100 gpm (40-400 l/min).
|
|
B-BGH |
ULTIMATIC W/GRIP 1" NH (25mm) Full automatic 100 psi (7 bar) nozzle for use on 3/4" (19mm) or 1" (25mm) hose. Flow range of 10-125 gpm (40-500 l/min). Includes pistol grip mounted below the valve, flush without shutting down, six position detent flow control slide valve, "Gasket Grabber" inlet screen, and molded rubber bumper with "power fog" teeth. Lightweight hard coat anodized aluminum for maximum resistance to corrosion and wear. 1.0" NH (25mm) full-time swivel is standard.
|
|
BGH-125-75MM |
ULTIMATIC W/GRIP 75MM STORZ
|
|
BGH-125-52MM |
ULTIMATIC W/GRIP 52MM STORZ
|
|
BP20-111 |
ULTIMATIC FO6 W/GRIP 2.5"BIC MALE
|
|
BP20-057 |
ULTIMATIC FO7 W/GRIP 1.0"BSP
|
|
BP20-058 |
ULTIMATIC FO7 W/GRIP 1.5"BSP INLET
|
|
BH-125-38MM |
ULTIMATIC NOZZLE 38MM STORZ
|
|
BP20-237 |
ULTIMATIC FO4 BLUE GRIP 3/4"BSP INLET
|
|
BGH-125 |
ULTIMATIC W/GRIP 1.5" NH (38mm) Full automatic 100 psi (7 bar) nozzle with 1.5" NH (38mm) coupling and thread. Flow range of 10-125 gpm (40-500 l/min). Includes pistol grip mounted below the valve, flush without shutting down, six position detent flow control slide valve, "Gasket Grabber" inlet screen, and molded rubber bumper with "power fog" teeth. Lightweight hard coat anodized aluminum for maximum resistance to corrosion and wear. Rocker lug 1.5" NH (38mm) full-time swivel coupling is standard.
|
|
BGHL-125BICJ |
ULTIMATIC W/GRIP 2.5"BIC MALE
|
|
BGH-2.0BSPM |
ULTIMATIC W/GRIP 2.0"BSP MALE INLET
|
|
BP20-058A |
ULTIMATIC FO7 W/GRIP 1.5"BSP ARTICULATED
|
|
|
BP20-092 |
ULTIMATIC FO6 W/GRIP 1.5"BSP INLET
|
|
BL-BH |
ULTIMATIC NOZZLE - LOW PRESSURE VERSION. Same as B-BH, but operates at a lower pressure of approximately 75 psi (5 bar). Flow range is 10-100 gpm (40-400 l/min).
|
|
BP20-052 |
ULTIMATIC FO7 W/GRIP 3/4"BSP INLET
|
|
BHL-125 |
ULTIMATIC NOZZLE LOW PRESSURE VERSION WITH 1.5" (38mm) COUPLING. Same as BH-125 above, but operates at a lower pressure of approximately 75 psi (5 bar). Flow range is 10-100 gpm (40-400 l/min).
|
|
BP20-130 |
ULTIMATIC FO4 GRIP 1.5"BSPF
|
|
BP20-098 |
ULTIMATIC FO6 W/ GRIP 1.0"BSP
|
|
BP20-131 |
ULTIMATIC FO4 BLUE GRIP 1.5"BSPF
|
|
BP20-110 |
ULTIMATIC FO6 W/GRIP 2"BSP MALE Full automatic 5 bar nozzle with 52mm coupling and thread. Flow range of 150-400 l/min. Includes pistol grip mounted below the valve, flush without shutting down, six position detent flow control slide valve,
"Gasket Grabber" inlet screen, and molded rubber bumper with "power fog" teeth. Lightweight hard coat anodized aluminum for maximum resistance to corrosion and wear. 52mm full-time swivel coupling is standard.
|
|